Specifications
- Floor: 1/4” PLone piece
- Crossmember: 3 x 4.1 channel 12″ on center
- Walls/Roof: 1/4” PLsolid welded, inside liner hooks
- Structure: Tubing and formed channel supports rated to operated at 30″ hg
- Door: 1/4” PLwith tubing frame
- Front: 1/4” PLwith push plates
- Pick up: Standard cable with 2” x 6” x 1/4” rails, gusset at each crossmember
- Wheels: (4) 10” DIAx 9” long with grease fittings
- Door Latch: (4) independent ratchet binders with chains, vertical second latch
- Gaskets: Extruded rubber seal with metal retainers
- Welds: All welds continuous except sub structure crossmembers
- Finish: Coated inside and out with direct to metal, rust inhibiting acrylic enamel color coat
- Hydrotesting: Full capacity static test
- Dimensions: 22′-11″ long (21′-8″ inside), 94″ wide (83″ inside), see drawing for height
- Options: Steel grit blast and special paint, Ampliroll, Heil and Dino pick up
