CONT. A B
20 YD 41 53
25 YD 53 65
30 YD 65 77
Specifications
- Floor: 3/16” PLone piece
- Cross Member: 3 x 4.1 channel 16″ on center
- Walls: 3/16” PLsolid welded with tubing top, inside liner hooks
- Door: 3/16” PLwith tubing frame
- Front: 3/16” PLslant formed
- Pick Up: Standard cable with 2” x 6” x 1/4” rails, gusset at each crossmember
- Wheels: (4) 10” DIAx 9 long with grease fittings
- Door Latch: (3) Independent ratchet binders with chains, vertical second latch
- Gaskets: Extruded rubber seal with metal retainers
- Welds: All welds continuous except substructure crossmembers
- Finish: Coated inside and out with direct to metal, rust inhibiting acrylic enamel color coat
- Hydrotesting: Full capacity static test
- Dimensions: 22′-11″ long (21′-8″ inside), 99″ wide (88″ inside)
- Options: Steel grit blast and special paint, Ampliroll, Heil and Dino pickup
- Roof: 3/16” PLroof panels with tubing and channel support frame
- Lids: (2) 68″ x 90″ metal rolling lids spring loaded, self raising
- Rollers: 4″ V-groove rollers with delrin bearings and grease fittings
- Opening: (2) 60″ x 82″ openings with 8″ divider centered on container
- Latch:(2) independent ratchet binders with chains per lid
- Gaskets: Extruded rubber seal with metal retainers
