Corrugated Wall/ Liquid Frac Tank
Dragon Model 500-Barrel Corrugated Wall, Liquid Frac Tanks come equipped with new running gear and 10 mil DFT chemical resistant liners. All frac tanks are steel grit blasted and painted to your specs.
Dragon Frac Tanks are built from new 1/4″ Heavy Duty Corrugated Steel. You design, we deliver. All models available now!
Specifications
* Floor: 1/4” PL, V-Bottom with integral formed side channels
* Floor Support: 10″ channel longitudinal runners with 8″ channel and formed 1/4” PL channel crossmembers
* Walls: 1/4” PLsolid welded, corrugated steel, corrugations 15″ on center
* Roof: Flat top, 1/4” PLsolid welded with channel supports outside
* Front/Rear: 1/4” PLsolid welded, corrugated steel, 10″ radius at vertical outside corners
* Drain/Fill: 4″ floor drain at rear end, 3″ fill pipe to roof at rear, 4″ suction line connection at front, 4″ mid high connection at front, 8″ flanged front manifold connection with turn down to floor sump
* Manway: 21″ manway on front, side, (3) non-sealed hatches on roof
* Pick Up: Standard 5th wheel king pin
* Welds: All welds continuous except substructure crossmembers
* Axle: 25,000 lb. axle with air brakes, 11.00 x 22.5 bias tires on steel disc wheels
* Access: Front stairway
* Finish: Per customer specifications
* Hydrotesting: Full capacity static test
* Dimensions: 45’ long, 8’-6″ wide, 10’ high; 500 barrel capacity
* Tank pressure/ vacuum relief vent
* Level gauging
* Options: Special tank linings, special sizes, open top design, fixed or removable steam coils, 8″ exterior manifold assembly
