CONT.     A     B
20 YD     41     53
25 YD     53     65
30 YD     65     77

Specifications

  • Floor: 1/4” PLone piece
  • Cross Members: 3 x 4.1 channel 12″ on center
  • Walls: 3/16” PLsolid welded with tubing top rail, inside liner hooks
  • Door: 3/16” PLwith tubing frame
  • Front: 3/16” PLwith push plates
  • Pick Up: Standard cable with 2” x 6” x 1/4” rails, gusset at each crossmember
  • Wheels: (4) each, 10” DIAx 9” long with grease fittings
  • Door Latch: 4 independent ratchet binders with chains, vertical second latch
  • Gaskets: Extrudents rubber seal with metal retainers
  • Welds: All welds continuous except substructure crossmembers
  • Finish: Coated inside and out with direct to metal, rust inhibiting acrylic enamel color coat
  • Hydrotesting: Full capacity static testing
  • Dimensions: 22′-11″ long (21′-8″ inside), 99″ wide (88″ inside), see drawing for height

Container Roof Options

  • Open top with mounted tarp
  • Split rolling lids
  • Over and under rolling lids
  • Side opening (rolling) plastic lids